FC 30 CASTINGS
SLIDE WAYS HARDENED & GROUND
SPINDLE & GEARS HARDENED & GROUND OF CHROME
MOLYBDENUM STEEL
SPINDLE SUPPORTED AT 3 POINTS BY ROLLER BEARINGS.(FAG,SKF,NSK)
OIL-DIPPED CLOSE TYPE GEAR BOX AND APRON.
SAFETY DEVICES ON LONGITUDINAL AND CROSS FEEDS.
WELL LOCKED AND TWO-SPEED TAILSTOCK FOR 560B SERIES
Download
SPECIFICATION
| SERIES | 460 | 560B | ||||
| MODEL | 460×1000 | 460×1500 | 560×1000 | 560×1500 | 560×2000 | |
|
CAPACITY |
Swing over bed | 460 mm (18”) | 560 mm (22”) | |||
| Swing over cross slide | 274 mm (10 ¾”) | 359 mm (14 1/8”) | ||||
| Swing in Gap (DxW) | 690 mm (27 1/8 ”) | 795×320 mm (31 5/16” x 12 9/16”) | ||||
| Height of center | 155 mm (6 1/8 “) | 280 mm (11 1/32”) | ||||
| Distance between centers | 1000mm(40”) | 1500mm(60”) | 1015mm | 1515mm | 2015mm | |
| Width of bed | 300 mm (11 13/16”) | 350 mm (13 ¾”) | ||||
| Cutting tool max section | 25×25 mm | 25×25 mm (1”x1”) | ||||
| Total travel of cross slide | 310 mm | 345 mm (13 19/32”) | ||||
| Total travel of top slide | 128 mm | 200 mm (7 7/8”) | ||||
|
HEADSTOCK |
Spindle bore | 58 mm (2 ¼” ) | 80 mm (3 5/22”) | |||
| Spindle nose | D1-6 | D1-8 or A1-8 | ||||
| Spindle morse taper in nose in sleeve | M.T. #6 x #4 | M.T. #7 x #5 | ||||
| Spindle speeds number | 12 | 12 | ||||
| Spindle speeds range | 25-2000 R.P.M. | 20-1600 R.P.M. | ||||
|
THREAD & FEEDS |
Leadscrew diameter&thread | 35 mm (9/8”) x 4 T.P.I | 40 mm (1 3/8”) x 4 T.P.I | |||
| Threads imperial pitches | 2-112 (60 Nos) | 4-112 (50 Nos) | ||||
| Threads imperial pitches | 0.1-14 (41 Nos) | 0.25-7 (24 Nos) | ||||
| Diametral pitches DP/DP | 4-112 (50 Nos) | 4-64 (50 Nos) | ||||
| Diametral pitches MP/MP | 0.1-14 (41 Nos) | 0.25-14 (34 Nos) | ||||
| Longitudinal feeds imperial | 0.0011”-0.633”/Rev. (42 Nos) | 0.0011”-0.0316”(50 Nos) | ||||
| Longitudinal feeds metric | 0.031-1.7mm/Rev.(42 Nos) | 0.030mm-0.850mm (50 Nos) | ||||
| Cross feeds (imperial/metric) | 0.00033”-0.01837” (42 Nos)
0.014-0.784mm (42 Nos) |
0.00024”-0.0068” (50 Nos)
0.001mm-0.286mm (50 Nos) |
||||
|
TAILSTOCK |
Total travel of tailstock quill | 120mm (4 ¾”) | 180mm (7 5/64”) | |||
| Tails stock quill | 60mm (2 5/16”) | 75mm (2 61/64”) | ||||
| Taper tailstock quill | M.T.No.4 | M.T.No.5 | ||||
|
MOTORS |
Spindle drive motor 4P,3PH | 5 HP | 7.5 HP | |||
| Coolang pump motor 2P,3PH | 1/8 HP (0.1kw) | 1/8 HP (0.1kw) | ||||
|
WEIGHT & MEASURES |
Machine space required (LxWxH) | 88”x36”x51” | 110”x36”x51” | 89”x38”x52” | 114”x38”x52” | 134”x38”x52” |
| Packing space dimentions (LxWxH) | 92”x39”x63” | 114”x39”x63” | 92”x45”x72” | 117”x45”72” | 137”x45”72” | |
| Net weight (kg) | 1720 kg | 2020 kg | 2510 kg | 2770 kg | 3030 kg | |
| Gross weight (kg) | 2045 kg | 2385 kg | 2830 kg | 3090 kg | 3400 kg | |
Standard Accessories:
1.) Center and Center Sleeve
2.)3-Jaw High Precision “MEEHANITE METAL: Scrill Chuck & Adapter
3.) 4-Jaw independent Chuck & Adapter
4.)Face Plates
5.)Steady Rest
6.)Follow Rest
7.)Thread Chasing Dial
8.)Coolant Equipment
9.)Work Lamp
10.)Auto Longitudinal Feed Stop
11.) Full Lenght Rear Splash Guard
12.) Full Lenght Foot Brake
13.) One Set of Wrenches