THE MACHINE HAS REASONBLE CONFIGURATION, IT IS EASY TO OPERATE
WITH PLEASURE,SAFETY AND RELIABILITY. THE BED OF MACHINE IS MADE OF HIGH
GRADE CAST IRON. THE GUIDE WAY IS HARDENED WITH SUPER-AUDIO FREQUENCY
INDUCTION AND FINE GROUND TO OBTAIN HIGH HARDNESS AND DURABLE
WEAR RESISTANCE. THE SPINDLE UNIT IS HIGH RIGID AND BALANCED,
AND WITH FINE GROUND GEARS AND HIGH RIGIDITY AND HIGH ACCURACY.
Download
SPECIFICATION
| ITEM | MODEL | TS-410 | TS-460 | TS-510 | |||
| 410×750 | 410×1000 | 460×1000 | 460×1500 | 510×1000 | 510×1500 | ||
|
SWING AND DISTANCE |
Swing over bed | 410 | 460 | 510 | |||
| Swing over cross slide | 240 | 288 | 320 | ||||
| Swing over gap | 595 | 640 | 735 | ||||
| Width of gap from faceplate | 185 | 185 | 230 | ||||
| Width of bed | 300 | 300 | 300 | ||||
| Distance between centers | 750 | 1000 | 1000 | 1500 | 1000 | 1500 | |
|
SPINDLE |
Spindle bore | 52 | 52 | 82 | |||
| Spindle nose | D1-6 | D1-6 | D1-8 | ||||
| Taper of spindle bore | MT.No.6 | MT.No.6 | Ø 90 mm. Metric 1:20 | ||||
| Taper of center | MT.No.4 | MT.No.4 | MT.No.4 | ||||
| Number of spindle speed | 12 | 12 | 12 | ||||
| Range of spindle speeds (RPM) | 32-2000 | 32-2000 | 16-1600 | ||||
|
THREADS AND FEED RANGE |
Metric teeth (mm) | 0.4-1.4 | 0.4-1.4 | 0.5-14 | |||
| Inch teeth (T.P.I.) | 2-56 | 2-56 | 2-56 | ||||
| Module threads | 4-56 | 4-56 | |||||
| D.P.Threads | 0.4-7 | 0.4-7 | |||||
| Longitudinal | 0.03-0.90 | 0.03-0.90 | 0.06-0.82 | ||||
| Cross | 0.015-0.45 | 0.015-0.45 | 0.017-0.242 | ||||
| TAIL
STOCK |
Diameter of quill | 55 | 55 | 60 | |||
| Quill travel | 120 | 120 | 127 | ||||
| Taper of center | M.T.4 | M.T.4 | M.T.4 | ||||
|
GENERAL |
Spindle drive motor | 4 kw (5 HP) | 4 kw (5 HP) | 5.5 kw (7.5 HP) | |||
| Coolant pump motor | 0.90 kw | 0.90 kw | 0.90 kw | ||||
| Weight (approx) | 1450 kg/1700 kg | 1750 kg/2000 kg | 2050 kg/2250 kg | ||||
*specifications are subject to change and improve without notice or obligation
| STANDARD ACCESSCORES: | OPTIONAL ACCESSORIES: |
| 1.)CENTRES & CENTRE SLEEVE | DRIVE PLATE |
| 2.) 4-WAY TOOL POST | CHUCK GUARD |
| 3.) SERVICE TOOLS | FULL LENGTH REAR SPLASH GUARD |
| 4.) THREADS CUTTING INDICATOR | 4 POSITION CARRIAGE STOP |
| 5.) STEADY REST | AUTO LONGITUDINAL FEED STOP |
| 6.) FOLLOWER REST | |
| 7.) FACE PLATE | |
| 8.) WORK LAMP | |
| 9.) COOLANT SYSTEM WITH ELECTRO PUMP | |
| 10.) 3-JAW HIGH PRECISION SCROLL CHUCK | |
| 11.) 4-JAW INDEPENDENT CHUCK |