TS-510X1500

NEEDN’T CHANGE ANY GEARS YOU CAN TURN ALL THE METRIC AND
INCH THREAD INDICATING IN CHART
THREE POINTS SUPPORT FOR SPINDLE
CLUTCH IN APRON FOR SAFETY & FOR CHANGING APRON FEED
DIRECTION WITHOUT CHANGING SPINDLE RUNNING DIRECTION.

Download

SPECIFICATION

ITEM	MODEL	TS-410		TS-460		TS-510
		410×750	410×1000	460×1000	460×1500	510×1000	510×1500
SWING AND DISTANCE	Swing over bed	410		460		510
	Swing over cross slide	240		288		320
	Swing over gap	595		640		735
	Width of gap from faceplate	185		185		230
	Width of bed	300		300		300
	Distance between centers	750	1000	1000	1500	1000	1500
SPINDLE	Spindle bore	52		52		82
	Spindle nose	D1-6		D1-6		D1-8
	Taper of spindle bore	MT.No.6		MT.No.6		Ø 90 mm. Metric 1:20
	Taper of center	MT.No.4		MT.No.4		MT.No.4
	Number of spindle speed	12		12		12
	Range of spindle speeds (RPM)	32-2000		32-2000		16-1600
THREADS AND FEED RANGE	Metric teeth (mm)	0.4-1.4		0.4-1.4		0.5-14
	Inch teeth (T.P.I.)	2-56		2-56		2-56
	Module threads	4-56		4-56
	D.P.Threads	0.4-7		0.4-7
	Longitudinal	0.03-0.90		0.03-0.90		0.06-0.82
	Cross	0.015-0.45		0.015-0.45		0.017-0.242
TAIL STOCK	Diameter of quill	55		55		60
	Quill travel	120		120		127
	Taper of center	M.T.4		M.T.4		M.T.4
GENERAL	Spindle drive motor	4 kw (5 HP)		4 kw (5 HP)		5.5 kw (7.5 HP)
	Coolant pump motor	0.90 kw		0.90 kw		0.90 kw
	Weight (approx)	1450 kg/1700 kg		1750 kg/2000 kg		2050 kg/2250 kg

*specifications are subject to change and improve without notice or obligation

STANDARD ACCESSCORES:	OPTIONAL ACCESSORIES:
1.)CENTRES & CENTRE SLEEVE	DRIVE PLATE
2.) 4-WAY TOOL POST	CHUCK GUARD
3.) SERVICE TOOLS	FULL LENGTH REAR SPLASH GUARD
4.) THREADS CUTTING INDICATOR	4 POSITION CARRIAGE STOP
5.) STEADY REST	AUTO LONGITUDINAL FEED STOP
6.) FOLLOWER REST
7.) FACE PLATE
8.) WORK LAMP
9.) COOLANT SYSTEM WITH ELECTRO PUMP
10.) 3-JAW HIGH PRECISION SCROLL CHUCK
11.) 4-JAW INDEPENDENT CHUCK